Differences between Neutral Silicone Sealant and Medium Silicone Structural Adhesive

Jun 05, 2025

Leave a message

I. Differences in Composition and Curing Mechanism
1. Neutral Silicone Sealant:

- Main ingredient: hydroxyl-terminated polydimethylsiloxane. It cures by dealcoholization by absorbing moisture from the air, forming a flexible elastomer upon curing.

- Cures slowly (tack-free time approximately 30-60 minutes, full cure takes 24-72 hours), making it suitable for applications requiring repositioning.

- Contains no acid and is non-corrosive to substrates such as metal and glass. Its pH is near neutral (6.5-7.5).

2. Medium Silicone Structural Adhesive:

- Adds modified silanes or plasticizers to form a high-modulus (elastic modulus ≥ 0.4 MPa) bondline upon curing. Some products are certified to the ASTM C1184 standard.

- Faster curing (tack-free time 20-40 minutes) and high bond strength (tensile strength ≥ 0.7 MPa, refer to GB 16776-2005), making it suitable for load-bearing structures.

II. Performance and Application Comparison
1. Mechanical Properties:

- Neutral silicone sealants typically have a tensile strength of 0.5-1.0 MPa and an elongation of 200%-300%, making them suitable for sealing dynamic joints (such as gaps between doors and windows).

- Medium silicone structural adhesives generally have a tensile strength exceeding 1.0 MPa, with some high-strength grades reaching 1.5 MPa (such as Baiyun SS622). They are specifically designed for structural bonding applications such as glass curtain walls and dry-hanging stone.

2. Weather Resistance and Temperature Range:

- Both are UV-resistant, but medium silicone structural adhesives have a wider long-term temperature range (-40°C to 150°C, compared to -50°C to 120°C for neutral silicone adhesives).

Neutral silicone adhesives focus more on waterproofing and mildew resistance (complying with GB/T 14683-2017), while structural adhesives must pass seismic testing (such as JIS A5758).

3. Typical Applications:

- Neutral silicone adhesives: Bathroom waterproofing and sealing, tile grouting, and pipe joint sealing.

- Medium silicone structural adhesives: High-rise building glass curtain walls, sunroom frame bonding, and elevator shaft reinforcement.

III. Application Precautions
1. Before applying neutral silicone adhesives, the substrate surface must be cleaned to avoid oil contamination that may affect adhesion. Structural adhesives require a dry substrate and the use of a primer (for example, aluminum requires a special treatment).

2. Structural adhesives must undergo compatibility testing (referring to ASTM C1087) to prevent chemical reactions with contact materials.

The above comparison shows that although both are organic silicone adhesives, their design objectives and performance indicators differ significantly. Users should choose one based on their specific needs.

Send Inquiry