Restrictions On The Use Of Neutral Silicone Sealant
Jul 08, 2025
Leave a message
1: Not suitable for structural assembly
2: Not suitable for weatherproof sealing of various building curtain walls
3: Not suitable for joints buried underground or in areas exposed to water
4: Not suitable for use on building materials containing grease
5: Not suitable for transparent materials such as copper and zinc, and not suitable for use in interior perforated fire protection systems
6: Butt joints must be at least 6 mm wide but not exceed 5 mm. Not suitable for applications where the joint tape is less than 3 mm thick
7: Not recommended for joints with a thickness exceeding 5%
8: Substrate surface Application is not recommended if the surface temperature is below 4°C or above 40°C.
9: Incompatible with materials that exude grease, plasticizers, or solvents.
10: Frosted or damp surfaces will not bond.
11: Airtight areas (curing depends on moisture in the air).
12: Dirty or loose substrates.
13: Certain unvulcanized or partially vulcanized rubber and tapes.
14: Painted surfaces, where cracking or peeling of the paint film may cause seal failure.
15: Surfaces that come into direct contact with food.
16: Areas subject to mechanical wear.
Send Inquiry




